help with axle

[wee gav]

dose any1 no were a can get instructions for the rear disc coversion for ma corsa

[rhydgte]

From experience removing/fitting rear beams on a few cars (including a corsa) it's a fairly straight forward job (take your time with the brake side of things as it's easy to bend/snap the brake lines especially where the go into the rear cylinders - undo the brake lines at the beam not at the cylinders)

Once rear dampers undone (breaker bar & 19mm socket iirc) handbrake cable disconnected on both sides, and brake lines disconnected there's only two bolts at the pivots to undo and then the whole beam comes off.

Piece of cake