PDA

View Full Version : how to wire in omega rear view auto tint mirror



FaT-AsTra16v
07-04-2007, 11:16 AM
WIRING INFO

brown to earth
black to ignition (found on interior light)
white/black to reversing light wire (found in the passenger footwell - same colour)
grey/black to the interior light grey wire.


You have no tint when in reverse so you can see where you are going.
The light sensor is deactivated when the interior light is on to prevent the light dimming the mirror.


You may be left with another 7 wires which are for electric adjustment of the mirror. If you wish to connect this up details are below.

Fit another vauxhall mirror adjustment switch e.g. by the gear leaver. A late switch would be best (e.g from a vectra) without the heater button or led.

Connect the following switch wires up to the electric window switch connectors under the handbrake grip.

Black to Black (ignition)
Brown to Brown (earth)

Connect black/red to black/red on the omega mirror
Connect yellow to blue/red on the omega mirror
Connect green to blue/white on the omega mirror

If the switch moves in the wrong dirrection, i.e up/down when it should go left/right. Swap the yellow & green wires round.

wayne85
07-04-2007, 07:30 PM
aaaarrrrrrrrrrrrrr yes the earth wire think il ask wol help me

FaT-AsTra16v
07-04-2007, 07:32 PM
pmsl

Chikin
09-04-2007, 02:26 PM
lmao, only ever needs a womans touch and it be fine ;)